Introduction to Manufacturers of Large Fish and Tofu Steam Production Line Continuous Crab Steaming Line
The fully automatic steam line forming assembly line realizes integrated production, saving labor while increasing production. The steam line process has a pump machine to suck materials to an automatic touch plate, and the fish tofu formed by the touch plate is steamed through the steam line and automatically cut into pieces. Continuous Steam Heating Crab Steaming Line Fully Automatic Noodle Steaming Line Nut Steaming Line
1. Power supply: 380V/50H
2. Total power: 12KW
3. Material: The thickness of the formed inner groove stainless steel plate is 2mm, the measured thickness of the outer surface is not less than 1.5mm, and the measured thickness of the inner and outer layers of the upper cover is not less than 1.2mm. The overall material is SUS304, a fully automatic and continuous large-scale fish and tofu processing line customized by the manufacturer
4. The upper cover is controlled by electrical appliances, with a length of 1 meter per section
5. Steam line size: L/W/H=3300 * 750 * 2000mm
6. The width of the mesh belt is 600mm.
7. Feeding area: automatic discharge spreader
8. Cooking area: Well sealed, equipped with observation doors (300mm * 400mm) for easy observation and cleaning. There are more than 5 observation doors, and the speed and temperature of the chain can be adjusted by Shanghai Hertz frequency converter. Fully automatic large-scale continuous plate and strip type fish tofu steam production line
9. Partition zone: Automatic strip cutting, then automatic block cutting, adjustable in size, and equipped with protective cover.
10. Drainage system: There is a drainage outlet at the bottom of the steam line, which is curved to prevent water accumulation.
11. Temperature control system: Automatically adjust heating.
12. Exhaust system: installed at both ends of the steam line, with an automatic exhaust port of air duct type, and exhaust pipes made on site.
13. Production capacity 1.2-1.5 tons/hour.
14. Factor of safety: leakage protection, overload automatic power-off.
